This website requires JavaScript.

How to choose between aluminum and steel corner brackets

Blog  /  How to choose between aluminum and steel corner brackets

How to choose between aluminum and steel corner brackets

Nov 04,2024

Corner brackets, essential in connecting and supporting equipment and components, provide stability and alignment for heavy-duty machinery and structural assemblies. Due to the diversification of application fields nowadays, there are various types of corner brackets to choose from, of which steel and aluminum are the more common two materials. In this article, we mainly introduce the difference between these two and how to go about the selection.


Materials Characteristics for corner brackets


Aluminum corner brackets are usually made of die-cast aluminum alloy material through cutting, punching, milling and other steps.  It can also be given various surface treatments, such as sandblasting, anodizing, etc., to give it a better appearance. Aluminum corner brackets can be used with aluminum alloy profiles with similar color and texture as aluminum profiles.Aluminum corner brackets inherit the characteristics of aluminum alloy profile, which is not easy to rust, has good corrosion resistance, and is suitable for various environmental conditions, especially wet or chemical corrosion environments.Aluminum is lighter compared to other metals, easy to install and carry. The corner brackets are suitable for occasions that require frequent movement or assembly.
Steel corner brackets are usually made of cold-rolled or hot-rolled steel plate, with high strength, good compression resistance and corrosion resistance. The surface is usually ground, polished, oil sprayed or plated to enhance the appearance of the product quality and service life. However, steel corner brackets are not the same corrosion resistant as aluminum and may require additional anti-corrosion treatment. Processing and forming may be more complex and expensive than aluminum.Steel corner brackets have high strength, can withstand large loads, and are suitable for structural connections. High rigidity, not easy to deform, suitable for heavy load or high pressure applications.


Cost of aluminum and steel corner brackets


After understanding the basic characteristics of the two materials, you may still not be quite sure which one you should choose, next we will analyze the cost/expense of aluminum and steel corner brackets from all angles so that you can make a further choice.


  • Material Costs: Aluminum corner brackets are usually more expensive to manufacture because of the price of the aluminum itself and the relative complexity of the machining process. Steel corner brackets, on the other hand, are relatively inexpensive, especially when produced on a large scale, where the price advantage of steel is significant.
  • Production Expense: The production process for aluminum corner brackets includes extrusion and die casting, which allows for high precision and consistency, but is relatively complex, resulting in higher costs. Steel corner brackets have a relatively simple production process, usually accomplished by stamping or cutting, and are less costly.
  • Maintenance Costs: Aluminum corner brackets have good corrosion resistance and are suitable for use in wet or chemically corrosive environments, which may reduce long-term maintenance and replacement costs. Steel corner brackets may require additional corrosion protection, increasing subsequent maintenance costs.
  • Weight & Shipping: Aluminum corner brackets are lightweight and relatively inexpensive to transport, while steel corner brackets are heavier and may be more expensive to transport. For projects that require frequent movement or installation, aluminum corner brackets may be more advantageous.


Taking all these factors into consideration, the choice of aluminum or steel corner brackets should be based on specific application needs, budgetary constraints, and long-term cost of use.


Aluminum and steel corner brackets applications


Aluminum corner brackets are lightweight and easier to work with. They are often used in applications which require lightweight construction. Listed below are a few application scenarios for aluminum corner brackets.


  • Mechanical equipment: Aluminum corner brackets can be used to mount mechanical components, increase the stability of mechanical structures, and make mechanical frames, workbenches and conveyor lines, etc.
  • Electronic industry: Aluminum angle brackets are used as electronic equipment brackets and fixings to install electronic components and instruments, and to make electronic equipment architectures, support structures and control cabinets.


Steel corner brackets are suitable for applications that require heavy loads or are used in harsh environments due to their durability, strong load-bearing capacity and resistance to deformation.


  • Logistics packaging: Steel angle brackets are used to reinforce and protect the packaging of large household appliances, furniture, etc. during transportation to prevent moisture, wear and extrusion.
  • Mechanical equipment: During the transportation and storage of mechanical equipment, the use of steel corner brackets can increase the stability of the packaging and play a protective role.


Conclusion


When choosing between aluminum or steel corner brackets, the decision needs to be based on the specific application needs, cost budget, environmental conditions, and aesthetic requirements. If the application requires high load carrying capacity and structural strength, steel corner brackets may be a better choice. If the application is more focused on cost-effectiveness, corrosion resistance, and aesthetics, aluminum corner brackets are recommended.

At JLCMC, we offer high quality-price aluminum corner brackets now; and new members who register on the website will enjoy $19 off coupons!

Register at JLCMC to Get a $19 Coupon

Recent Posts

  • Optimizing aluminum extrusion frames for Enhanced 3D Printing Accuracy

    Nov 14,2024

  • Quick Preview of JLCMC's Screw Supply (Ongoing Updates)

    Nov 07,2024

  • Toggle Clamp Basics: Types, Usage Tips, and Purchase Recommendations

    Nov 05,2024

  • Pressure sensors enhance manufacturing with data support

    Nov 04,2024

  • DC fans application scenarios and choose the right ones

    Nov 04,2024