1. Reasonably select the material of the rivet to meet the anti-corrosion requirements

2. Ensure that the hardness of the plate meets the requirements for the use of the rivet parts.

3. When processing the mounting holes, avoid hardening and keep the mounting hole mouth sharp.

4. The size of the mounting hole needs to be strictly controlled to meet higher push-out force and twist-out force.

5. Before installation, ensure that the rivets are positioned accurately.

6. Before installation, make sure the mounting holes meet the minimum margin requirements and ensure that the board is flat.

7. During installation, ensure that the force on the load-bearing surface is even.

8. Professional installation tools are required during installation.

9. When the mounting hole is formed by punching, the rivet must be installed from the punched surface.

10. During installation, set a reasonable installation force according to actual needs.

11. Using the installation force we recommend can achieve better results after installation.

Pressure Rivet Nut