What should be paid special attention to when installing the wire screw insert? Pay attention to avoid the wire screw insert from being scrapped during installation.

During the installation of wire thread inserts, they are easily scrapped due to the influence of many factors. Sometimes, the scrap rate is extremely high.

1. Before installing the wire screw sleeve, when tapping with a tap, you need to pay attention to the selection and use of the drill bit. When the drill bit is improperly selected or when the drill bit is worn out after a long time of use, the bottom hole will be drilled into a shape. When we are writing, if the bottom hole is off, the drill hole will be scrapped. At this time, you must choose a new drill bit according to the basics and operate the drill bit correctly.

2. Choose the right wire thread insert installation wrench. Ordinary wire thread insert wrenches are suitable for small batch installation, semi-automatic wire thread insert wrenches are suitable for medium batch installation, fully automatic wire thread insert wrenches are suitable for large batch installation, and simple T-type wire thread insert wrenches are suitable for maintenance and installation.

3. Slot jumping occurs during the installation of the wire thread insert: the drill bit or tap is not suitable, and the wire thread insert tooth profile or thread surface is not standard: we can reshape the bottom hole, make the tooth profile shallow or replace the tap with a new one, and replace the new wire thread insert.

4. When purchasing threaded sleeves, you should choose a regular threaded sleeve manufacturer. In this way, the material and outer diameter range of the threaded sleeve will be guaranteed, and it can also ensure that the scrap rate of the threaded sleeve can be effectively reduced during the installation process.

Category	Tangless	Body Material	SUS304
Surface Treatment	No	Coarse/Fine Thread	Coarse Thread

Threaded Inserts Tangless Type